Racecap FastDry are compatible with KTM wheels and spacers produced in 2007 or later; Husaberg from 2007 to the end of production, Husqvarna from 2014 on. Racecap FastDry are compatible with KTM and Husaberg wheel hub produced from 2002 on, but spacers are compatible if produced in 2007 or later.
Racecap FastDry are not compatible with Husqvarna models previous to 2014.
The left front Racecap cannot be installed if the original or aftermarket KTM/HSQ diskguard is mounted. In order to mount Racecap Fastdry, wheels should be removed from the bike.
It is recommended to wash the wheels carefully, before mounting protections.
WARNING: Proper installation of Racecap requires them to be anchored to the spacer and released from the hub (the cap remains stationary while the hub rotates).
The Racecap can cause a squeak, it is not a defect. This Racecap kit consists of No.2 specific protections for front wheel and adapters for KTM / HSQ 2016 or later.
The front cap is marked with the letter F (FRONT).
1) Remove wheel from motorcycle.
2) Clean and degrease spacers carefully and insert the adapter ring on the spacer as shown in the picture. (*). The adaptor ring will keep the right position for mechanical interference; if necessary use cyanoacrylate glue.
3) Place the Racecap in the appropriate seat as shown in the picture.
(*) In models previous to 2016, Racecap FastDry do not need any adapter ring as they exploit spacer shape.
Removing spacers from the wheel is not necessary to mount Racecap FastDry.
Hint: take a ride with the bike after washing, to allow any small water deposit to exit from Racecap FastDry.
Frienduro disclaims every liability for damage caused by improper use of Racecap protections.
The product is guaranteed for manufacturing defects for two years, according to the law.